Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 3 of 3
  1. #1
    Senior Tech 100+ Posts
    Konica Minolta C454 + C454e

    Kenny's Avatar
    Join Date
    Jun 2009
    Location
    Leeds
    Posts
    134
    Rep Power
    23

    Konica Minolta C454 + C454e

    Hi guys,

    We have a C454 + C454e on site at a customers. These machines are giving us a bit headache as the drum/developing units don't seem the last 2 minutes in the machines. The transfer belts always seem to develop an issue with a stripe at the top side of the belt (cleaning mechanism failing), we do clean this out but there is only so much you can clean this as it will develop a permanent stripe.

    The C454e had a c4101 (which we replaced the Ph unit) then C5603 (which we replaced the FRB as it was fried) and now it has a constant C3201. These error came up straight after the other so which i believe the PRCB has gone.


    Machines are on the latest firmware.

    Meter count:
    C454 - 800,000
    C454e - 1,000,000

    Just wondering has anyone experienced these type of issues??

  2. #2
    Senior Tech 250+ Posts Max's Avatar
    Join Date
    Oct 2011
    Posts
    385
    Rep Power
    21

    Re: Konica Minolta C454 + C454e

    Are all drums, devs, I.belt and toners original and not over life? Waste toner coupling not blocked? Clean sensors? It's possible something wasn't put back correctly when PH was replaced and now you have various problems because of that.

  3. #3
    Technician
    Join Date
    Feb 2016
    Posts
    29
    Rep Power
    8

    Re: Konica Minolta C454 + C454e

    Hello

    Read the TAGB1701223EN (PSCSES_1701707EN)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here