Got from a wholesaler a BH-C-3110 with only 5k on the clock. CE Password has been changed to unknown. The usual 927...... is not accepted. Cannot call up the service mode.
Any solution please?
Hans
Got from a wholesaler a BH-C-3110 with only 5k on the clock. CE Password has been changed to unknown. The usual 927...... is not accepted. Cannot call up the service mode.
Any solution please?
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
I'm willing to take a gamble that the password is not changed, it's just a little more difficult to identify. I spent a good hour figuring this out. It's only a slight variation on the Konica Minolta standard:
V x8 down arrow to Utility > Select > Stop 00 Stop 01 > * to change alpha to numeric > 92729272 >
Select
Are you doing firmware? It's a little strange compared to the usual Konica Minolta way. I'll attach the document:
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks Cat. Yes, I am aware of that Alphanumeric issue and took care of it from the beginning, but no way.
Hans
" Sent from my Intel 80286 using MS-DOS 2.0 "
Whats wrong with it? O forgot its a toner chewing faulty thing.
Whatever
You can try Engine DIPSW 28, that will execute forcibly new release of a toner cartridge...in case toner chip is bad.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks