I'll say again “preventative” maintenance.
I'll say again “preventative” maintenance.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I have just updated the FW to a c364e printer without problems and ... The firmware got stuck, now the printer is KO.
I thought about this thread hahaha.
It has nothing to do with the subject but:
For those who are curious, in the end I discovered that the JS-506 caused the blockage. I removed the JS-506 and eventually the FW got updated. This C364e has a faulty motherboard, does not recognize the addictional trays and apparently plays tricks on the FW update. I removed the JS506 and updated it on another printer. Now works.
I have reinstalled the firmware on the problematic mfp. In any case, the printer now works. Yes, the unnecessary update made me lose some time.
does anyone have any news on the iseries? I knew that a big update was due in October. Currently the only one is 45. Does anyone have any news?
Have you seen the new iSeries FW?
It seems that the DipSwitch is no longer necessary.
It also appears that they are resolving to update the firmware remotely, without going on site.
No new FW as for now G00-45 is latest base. SW25 was for 8-series Function version of controller, up to now not needed for i-series.G00-45G00-45
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
In Europe, the G00-73 has left today.
The FW 45 always changes version 1.0
The FW 73 is now version 2.0
Bookmarks