Dislikes: 0
Hi everyone, i have a problem with c6500, after print 2000 cyan color file, cyan toner is charging too much, Dv unit cover, transfer belt are full of cyan. Cyan is coming out from backside fan. One new toner just printed 500 A5.
If you have faced this problem or know about this, please advise me.
Thanks
20191029_184528.jpg20191029_185627.jpg
how many pages on the drums/devs/belt?Originally Posted by Rohullah
Genuine OEM or compatible toner?
service Pms up to date?
Hi phil
Drum and Dv are new. Not worked more than 3000 pages, belt is 30%
Toner is also genuine. I faced this after i printed a file that is 90% light cyan.
You can check the toner filter on the right side of the printer.
You can also check the time and amount of toner you are filling.
Did you do all adjustments after you replaced dv/drums?
also try to clean your color reg sensors and do all adjustments again , including color registration and gamma adjustments
best of luck
This problem solved, It was DV problem
Thank you All
Glad you sorted out this but, what exactly was wrong with DV? Old/wrong developer, bad TCR sensor?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
It was from magnet roller inside dv unit, the roller was charging more and spreading out. So when i changed the DV unit, problem gone.
Thanks: 
Likes: 
Reply With Quote
Bookmarks