Damn you guys are on a rampage,pretty sure you scared him off though LOL
I don't like the new copier I just bought. It says "put face down" but every time I do it, it blinds my eyes.
These books are attached with any machine books
how you get rid of the lines.
Any book follow the instructionsWhatsApp Image 2019-11-01 at 9.09.04 PM.jpgWhatsApp Image 2019-11-01 at 9.09.16 PM.jpgWhatsApp Image 2019-11-01 at 9.09.30 PM.jpg
I am a normal user and the machine for the private office and I want to help remove fonts and do not know how is the way please help me a video file or one way or another and how to donate to the forum and I pay any amount I have no problems as long as I get help in solving the problem because I do not know how to use the printer In photography come on print works only without lines on paper
ok how to donate: at the main forum screen you will see " CONTRIBUTE " only a small 5-10$ donation is typical, but please feel free to donate as much as you feel will benefit you.
PHOTO paper requires different paper setting: Gloss/Photo paper (DO NOT USE -=INKJET=- paper, only media made for LASER/Copiers) also make sure you set it for a THICKER paper (might have to play with this to get acceptable PQ from it )
Dear mhmds102466,
We just wanted to let you know that your contribution has been confirmed.
Contribution date: 11-01-19, 20:46
Contribution amount: USD 10.00
You can check out all your contributions by visiting this page, My Contributions
We are very grateful for your support.
Best Regards,
The staff at Copytechnet.com
[QUOTE = Toxic؛ 922061] لن يساعدك كتابة نفس الشيء في مواضيع متعددة كثيرًا ، على العكس من ذلك ، سيصاب الناس بالإحباط من قراءة نفس الشيء في جميع المواضيع الحديثة.
الاستماع إلى Synthohol تقديم المشورة والقيام بإجراء التثبيت المناسب.
إذا كنت تريد حقًا الحصول على ملف البرنامج الثابت ، فيجب عليك التفكير في التبرع وستحصل عليه. [/ QUOTE]
Dear mhmds102466,
We just wanted to let you know that your contribution has been confirmed.
Contribution date: 11-01-19, 20:46
Contribution amount: USD 10.00
You can check out all your contributions by visiting this page, My Contributions
We are very grateful for your support.
Best Regards,
The staff at Copytechnet.com
Follow the setup instructions here. Mainly page E-11
This will get rid of your cyan and magenta lines.
link to service manual sent via PM too.
thanks for contributing, it means a lot.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks