I did not find the serial number of the scanner behind the machine Is it possible to be the problem of entering the serial number on the scanner from above under Glass
WhatsApp Image 2019-11-02 at 9.43.23 AM.jpg WhatsApp Image 2019-11-02 at 9.45.48 AM.jpg
S28C-6e19110221510.jpgS28C-6e19110221510.jpg
Is there another way to return the machine to the factory setting?
Or use my c284e-firmware
Because I do not know use the machine in copying
Because the problem of the emergence of lines problem is damn I do not know where it came from
Or do I do a formatting of the hardisk or memory stick, it is possible to solve the problem
I am facing the problem more than 3 months I am ready to donate again but I want a quick solution
Everyone here that knows and understands your machine and issue has said the same thing. Have you done EVERYTHING, every fucking thing, every motherfucking thing on page E-11 exactly as it is presented? Did you log the fuck into service mode and start with the date and time, then work through every single other fucking step on that page? Or did you just fuck with the serial number? All the money from all the oil fields in Saudi Arabia couldn’t donate enough to change the answer of what will fix the lines. Fuck sake already.
Brother.. I don't know HOW we can stress to this fucker...
DO THE DAMN INSTALLATION -= AS WRITTEN.. SKIP NO STEPS .. DO THEM IN ORDER =-
You are correct, we have given him the fix FOR MONTHS...
he has been provided with the actual guide that comes WITH the machine...
As Bill Engvall says " You Just Can't Fix STUPID" here's your sign!
Hi guys someone know the trick how to used the black drum on color on Ricoh MPC5000 ?
I just remembered on Ricoh MPC4500 but not on 5000
Sent from my iPhone using Tapatalk
Do you have some P codes showing on display because i think you have damaged drum k watching your photos (top side)?
What is machine meter count and parts counter?
0
Page 2 of 2FirstFirstPrevious12Results 11 to 15 of 15
Thread: Bizhub C652 horizontal lines
Thread Tools
Display
02-20-2014 #11
Okeer
Guest
Re: Bizhub C652 horizontal lines
I had the same trouble with a C452 and it was a memory error on the MFP board. After replacing the MFP board, everything was fine
Reply With Quote Reply With Quote
02-20-2014 #12
oommiiddaann oommiiddaann is offline
Technician
Join Date
Feb 2012
Posts
27
Rep Power
0
Re: Bizhub C652 horizontal lines
i think swap CCD because this lines is from bad image creation from scanner ccd not a physical problems in scanner like scan motor mirrors and other scan parts.
Reply With Quote Reply With Quote
02-21-2014 #13
methogod methogod is offline
Field Supervisor
500+ Posts
Bizhub C652 horizontal lines
Join Date
Dec 2008
Location
Baltimore, Maryland
Posts
727
Rep Power
30
Re: Bizhub C652 horizontal lines
if it prints ok, its a memory issue - usually fail memory stick has gone bad.. replace, then if still there go to the mpf board...
but check all connectors first, and does the same lines happen when scanning?
Reply With Quote Reply With Quote
02-21-2014 #14
Synaux Synaux is offline
Field Supervisor
500+ Posts
Join Date
Mar 2012
Posts
923
Rep Power
30
Re: Bizhub C652 horizontal lines
Quote Originally Posted by methogod View Post
if it prints ok, its a memory issue - usually fail memory stick has gone bad.. replace, then if still there go to the mpf board...
but check all connectors first, and does the same lines happen when scanning?
Agreed, if the issue shows on internal prints its most likely the memory. TAUS1001639EN
tnrtt has a lot of things to check, but probably the quickest and easiest thing to do is a memory check in Service Mode.
If NG try memory modules.
Then unfortunately the replacement of the MFP board.
However, do not depend on those memory checks as being unequivocal I have had memory checks pass even with a bad DIMM.
Reply With Quote Reply With Quote
03-01-2014 #15
tnrtt tnrtt is offline
Trusted Tech
50+ Posts
Join Date
May 2013
Location
phoenix, AZ
Posts
84
Rep Power
14
Re: Bizhub C652 horizontal lines
Quote Originally Posted by Okeer View Post
I had the same trouble with a C452 and it was a memory error on the MFP board. After replacing the MFP board, everything was fine
Thanks a lot, Okeer. Replacing the memory did the trick. This forum is great. No matter how weird the problem, somebody here has encountered it.
Bookmarks