C368 faded and enlarged

[copier addict]

try and stop the copy cycle and see what the image looks on the t-belt, if faded on there it rules out above the belt or start swapping units with another machine to rule out a consumable causing the faded copies or prints.the stretch looks more like a registration problem

Good point. I hadn't thought of it as two problems. Thanks for the push.

[allan]

Add some color to those prints.
That would give more info.
If the registration stays ok its secondary or primary.
If its black only it could be drum?

Stretched print is something running to fast.
Compressed prints would be stuff going to slow like the paper being slow.
Except if things are running slower in relationship with something already moving that would stretch too?
All confused now.

Fuser garbing it with some vigor?

Are the print light on all colors?

[copier addict]

Forgot to update this thread.
It turned out to be the printhead that was at fault.
Thanks for all the suggestions.