Hi, make sure the rubber is fixed on the bodywork inside.
It happened sometimes to find a piece of rubber crawling on the belt in those printers.
For the cyan, the ph window appears to be dirty.
Hi, make sure the rubber is fixed on the bodywork inside.
It happened sometimes to find a piece of rubber crawling on the belt in those printers.
For the cyan, the ph window appears to be dirty.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks