Hi everyone
I have a KM c6500 wrinkling paper inside fuser.
It happens with 70gsm paper to 130gsm, 150gsm is better, 210 or more no problem. It happens in single side and double side.
The wrinkling happen inside fuser, but dont know what is problem.
Hi everyone
I have a KM c6500 wrinkling paper inside fuser.
It happens with 70gsm paper to 130gsm, 150gsm is better, 210 or more no problem. It happens in single side and double side.
The wrinkling happen inside fuser, but dont know what is problem.
Fuser past life?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Clean the entrance plate, and check the state of the fusing lower roller. Good Luck!
look at all the bearings and heat sleeves in the fuser unit also check the oneways and all gears. is the fuser belt or press roller look worn. in a pitch i have soaked the bearings in wd 40 till i could get new ones ordered
Agreed for bearings and heat sleeves,have that recently.
Try to manualy rotate fusing knob when rollers make pressure and observe does it equally moves left and right side of lower roller approaching to fusing belt
Thank you guys from everyone of you
My printer server hard drive damaged, waiting to receive new one. Than i will come back on this post.
Bookmarks