Hi,
I kindly to ask, the 8 series and i series both support SMB 2.0 on network scanning?
Best regards,
Hi,
I kindly to ask, the 8 series and i series both support SMB 2.0 on network scanning?
Best regards,
Yes, it also supports SMB3.0
For security, you could update the firmware
Yup.
The machine need to set the dip switch and specific F/W?
( It's bizhub 758 )
Hi, no dipswitch required.
You can use dipsw 162-02 to disable SMB routing and you start from SMB2.0 minimum
I found this :
Admin setting->Network setting->SMB server setting->SMB server common setting
Inside there have one " SMB auth. protocol ", SMB1.0 and SMB1.0/SMB2.0 either one can be selected.
Here I can set it for the scan to server on SMB 2.0?
from a fellow member...
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
You need to install the GDB firmware outlined in the above bulletin first then worry about the dip switch
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Like Synt mention, with or without Dip Sw settings it will work with SMBv2 as soon as you install minimum FW version required.
Imho, do read more manual before posting new threads and try to follow up, never seen you reply with outcomes.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks