Reset total counters c368

[elmaligno]

hi folks! does anyone know how to set the total counters to 0 in the c368 series??

[copyman]

Why do you want to do this? Do you know it is illegal to turn counters back?

This is why Kon/Min makes it so hard to do. Only way it can be accomplished is by replacing several "expensive" boards, MFP, SSD, etc

[Synthohol]

put the SSD in a dry paper towel and microwave on low for no more than 8 seconds.
that will do it.

[allan]

put the SSD in a dry paper towel and microwave on low for no more than 8 seconds.
that will do it.

Was skeptical about doing that, what do you know it worked!

[Phil B.]

put the SSD in a dry paper towel and microwave on low for no more than 8 seconds.
that will do it.

I've had to extend the time out to 20secs...

[copyman]

put the SSD in a dry paper towel and microwave on low for no more than 8 seconds.
that will do it.

Shoot! I thought you said 8 mins

[Synthohol]

I've had to extend the time out to 20secs...

Is your microwave over 5 years old?
The nuclear rays are getting rusty. Have them cleaned by a professional or buy a new one.

[Toxic]

put the SSD in a dry paper towel and microwave on low for no more than 8 seconds.
that will do it.

I slightly improved this process.
If you hold microwawe on for about 30 sec you will reset all consumables as well as total counter.

[rrrohan]

i already have a few machine that do this. reports 0 prints in top right corner of consumables print out for some reason, sadly its still correct everywhere else

[tsbservice]

i already have a few machine that do this. reports 0 prints in top right corner of consumables print out for some reason, sadly its still correct everywhere else

This is known FW bug. Update FW.