Artifacts on C364e on Screen Panel

[cayyell]

Hi guys

From a perspective of a PC, looks like a dead graphic card or corrupted graphic driver to me.

And yeah, I did swap with a working screen panel and shows the same result.

IMG_20191128_104506_1.jpg

Is there a possible firmware to fix this?

[Synthohol]

ok, if you boot to a firmware stick is the screen normal?

[cayyell]

ok, if you boot to a firmware stick is the screen normal?

Nope, just done, still the same distortion.

[rrrohan]

id unplug the cable at MFPB and reconnect as you have obviously already done it at the touch panel end when swapping panel

[cayyell]

id unplug the cable at MFPB and reconnect as you have obviously already done it at the touch panel end when swapping panel

Nope, tried that didn't work as well

[rrrohan]

does it still print ok?

[cayyell]

I am guessing the mfp is dead.

I forgot check that before I accidentally plug-in a NVRAM reset usb.

So the print looks like this now
SKMBT_C55219112910230_0001.jpgSKMBT_C55219112910230_0002.jpg
both counter and test print. I am not sure because is this the pattern of uninitialized of the machine or what as I dont remember the counter list will look like even tho is uninitialized. But the gradient print is fine and smooth.

[rrrohan]

might be lucky and it just be a problem with RAM but id say MFPB