Hi hope some can help.
My C224 the aligment has step out (Magenta and Yellow) and i cant them them to go back in lineive changed both drums but nothing any ideas to re align the colours please
Hi hope some can help.
My C224 the aligment has step out (Magenta and Yellow) and i cant them them to go back in lineive changed both drums but nothing any ideas to re align the colours please
1. Don't let the people who may help you to pull/guess what you've done so far.
2. Post counters and consumables status.
3. Assuming you have SM. Any malfunction codes? If Yes perform the relevant troubleshooting procedure corresponding to the malfunction code first.
4. Read image troubleshooting section. There are step by step procedures what to check and to do, like Color Registration Adjustment etc.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
The color registration on these machines are done automatically by printing and then reading toner patches.
If the IDS sensors that read the patches are dirty, or if the patches are not developed, or if the transfer unit fails,
and even a faulty laser unit can cause color registration to fail.
Look for the oil can icon on the screen touch that and determine what P-code displays. Like P-6 and P-21 or P-22.
Troubleshoot from there.
Half tones will help to find out if there are void areas on the development.
Opening and closing the front door will force the machine to do stabilization and color registration.
Whatever
367949 metered copies
developing units, all colours between 51 and 57, black 99.
drums 96 black, 99 magenta, 25 yellow, 80 cyan.
I have SM, and there were no faults, I have replaced the black developer unit and drum.
Could you please send me a link to the 'troubleshooting' section?
Bookmarks