KM Feed rollers

[Bix]

Are there any advantages to putting iSeries rollers in the 8 series?
I started with KM which provided three identical rolls for everything, then 2 + 1 and now all different

[srvctec]

That's the 8 series roller its more expensive that the original A00J563600

Agreed

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.

In The UK the 8 series come with the clip in rollers A64J564101

Same here in the US.

[tsbservice]

Here in the US, the 8 series (C458) parts manual I just looked in, has the A64J564101 listed as the stock feed roller.
Same here in the US.

Check C258 parts manual, you may be surprised

[srvctec]

Check C258 parts manual, you may be surprised

That's what I figured, the smaller machines held onto the older rollers.

[Dev_nos]

I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.

I do use only OEM for black ribbed roller.

Where the real saving is using the aftermarket rollers on ADF's , no way in hell I'm paying $30 for a paper feed roller, A143563100, etc !!!!!

Can you give the name of your China Supplier please?
Thank you!

[Synthohol]

A00j563600 rollers are like 8 bucks if you are a legit dealer or can buy from one