KM Feed rollers

[EarthKmTech]

For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)

[copier tech]

For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)

“Limited space” even my London walking engineers carry a pack of 10!

[tsbservice]

For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)

Good advice, those a64j are even low priced plus 50% more expected life.

[copyman]

I use mostly China rollers. Like other poster I put them on oem shafts. If you get them from the right source they are same quality as oem. Wouldn't be surprised if they are coming from same factory.

I do use only OEM for black ribbed roller.

Where the real saving is using the aftermarket rollers on ADF's , no way in hell I'm paying $30 for a paper feed roller, A143563100, etc !!!!!

[EarthKmTech]

“Limited space” even my London walking engineers carry a pack of 10!

My bag contains everything but the kitchen sink as I absolutely detest having to walk back to the car unless necessary.

I even went from obese to skinny (by choice lost 35kg) and still hate walking back to the car. Obviously when belts or fusers etc are needed its still unavoidable.

[allan]

For those with limited space - you dont need to carry or use the old a00j red rollers anymore. Many of our techs now fit the pink, clippy rollers with grey cores (a64 part number) to everything.

You can pull out this grey core and use it in place of the a108 rollers too - also without issue.

I have a c360i already with 100k on it so that will be the first i series i'll have to change rollers on at some stage - I already have their rollers and other parts in stock but have not needed them yet. (except for a factory destroyed belt that needed replacement)

Please can you share the full part number for those, out of the loop with the newest stuff out there.

[tsbservice]

Please can you share the full part number for those, out of the loop with the newest stuff out there.

Here you are:
A64J564101

[copier tech]

Here you are:
A64J564101

That's the 8 series roller its more expensive that the original A00J563600

[tsbservice]

Here you are:
A64J564101

That's the 8 series roller its more expensive that the original A00J563600

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

[copier tech]

No, here that is not for 8 series. That is feed roller for BH C250i.
A00J563600 is feed/sep roller for C258.

In The UK the 8 series come with the clip in rollers A64J564101