Thanks: 
Likes: Yep, finally caught our office machine doing exactly what you describe. That needle me enough to make a quick ground connection from a paper clip and insulating tape.Originally Posted by EarthKmTech
Now it sleeps. EKmT rocks!
Dislikes: 0
Yep, finally caught our office machine doing exactly what you describe. That needle me enough to make a quick ground connection from a paper clip and insulating tape.
Now it sleeps. EKmT rocks!
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
It's the same for the 250i Series? or only for 258?
also applies to ineo 250i
However does anyone know where it is possible to find a wire ground from some MFP or part list?
I made my own cable.
PS the bulletin is strictly in relaition to I series.
I'm unaware of a problem with 8 series but if it works on them too id be interested to know, as would KM
Good to know! Thanks for sharing. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Hi, I confirm after several weeks that the solution is effective! Keep going regularly to standby. Only strange thing, I hear the speaker making a small noise (as if knocking) every minute.
Another thing, one morning I tried to wake her up, the MFP didn't wake up in any way. I have the default power settings, what do you think is the option that could cause this?
Ummm ... yesterday I think I brought bad luck.
The C250i has started to turn itself on again, even with the ground wire
Update: I've fixed the cable better and it seems to go back to standby.
But I have two curiosities:
1. I notice that the display when you touch it sometimes from a feeling of static electricity.
2. Does a new display have a grounding cable or is the proximity device simply changed? Did any of you understand what exactly causes this?
Mine machine sleeps like a champ after this mode. I have a feeling that some of first produced C250i had something wrong maybe MFPB minor change on later produced machines.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
After a test with the ground cable on 3 machines inhouse for 2 weeks i thought we had the solution but now i have a 250i GC1-75 which still wakes up again and again...
Reply With Quote
Bookmarks