Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    IC-303 System and User Software ISOs

    Greetings,

    Does anyone happen to have the .iso files for the System Software and User Software disks for the Fiery S450 (IC-303) so I can burn them to a blank DVD and install the system software using these?

    The System Software DVD that came with it hangs at "Uncompressing Linux... OK Booting to Kernel", while other bootable DVDs that I've tried worked just fine.

    Thanks.

  2. #2
    Service Manager 1,000+ Posts
    IC-303 System and User Software ISOs

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,424
    Rep Power
    52

    Re: IC-303 System and User Software ISOs

    linux is used to write the image to HDD. totally normal.

    im sending you links as soon as they download.

  3. #3
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    Re: IC-303 System and User Software ISOs

    Just an update:

    I can only boot to the System Software DVD only via a SATA DVD drive that I just added. The Fiery's own DVD drive doesn't seem to work properly.

    After it boots, it hangs at the "Booting to Kernel Part" and after a while the DVD drive seems to stop spinning.

    I can't get past this point in the installation. I never get the "All files will be deleted do you wish to continue" prompt in the Fiery's LCD.

    Any ideas on what am I doing wrong? Could it be the DVD disk itself is faulty?

    Thanks.

  4. #4
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    Re: IC-303 System and User Software ISOs

    Synthohol, thank you.

    After 4 days of downtime, I finally managed to get the Fiery back up and running again. It turns out that is must have had v3.0+ installed on it, not sure as to which exact one, and there was some anti-roll back protection in place, rendering the v1.1 disks that came with it useless. I was able to install v2.1 from the disks that you kindly provided me with, and I am now pleased to report that it works as it should, apart from a few minor inconveniences.

    Thanks again for your help.

  5. #5
    Service Manager 1,000+ Posts
    IC-303 System and User Software ISOs

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,424
    Rep Power
    52

    Re: IC-303 System and User Software ISOs

    i have 3.0 system but the 3.0 user .iso keeps failing to download from KM.
    ill keep trying so if successful ill PM you.

  6. #6
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    Re: IC-303 System and User Software ISOs

    Quote Originally Posted by Synthohol View Post
    i have 3.0 system but the 3.0 user .iso keeps failing to download from KM.
    ill keep trying so if successful ill PM you.
    Thank you, but before putting yourself into any further trouble, please read this.

    Is there any reason that I would want to upgrade from v2.1 to v3.0a? Any major fixes? I'm kinda reluctant to the idea of experimenting with the Fiery any further right now.

    The only thing that I would want to fix is for the Fiery to use metric paper sizes instead of imperial for e.g. printing its configuration page and other things like that, and not asking for colour specific paper when I am trying to print literally anything from it. Also, the "Detail Check" menu is now gone, which quickly allowed me to change the paper setting for the selected tray, which is a shame.

    Finally, are there any patches I need to install? And if I were to install v3.0a, would I follow the same procedure as I did with installing v2.1 or it won't have to delete everything and then install itself?

    Thanks.

  7. #7
    Service Manager 1,000+ Posts
    IC-303 System and User Software ISOs

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,424
    Rep Power
    52

    Re: IC-303 System and User Software ISOs

    probably tons of patches.
    use the fiery download manager and let it update itself.

  8. #8
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    Re: IC-303 System and User Software ISOs

    Quote Originally Posted by Synthohol View Post
    probably tons of patches.
    use the fiery download manager and let it update itself.
    I am guessing I will have to access it via remote desktop?

    Also, I made a few changes to my previous post, could you please take a second look at it? I just got my hands on v.3.0a isos and it turns out that they will update it to system 9, should I pull the trigger?

  9. #9
    Service Manager 1,000+ Posts
    IC-303 System and User Software ISOs

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,424
    Rep Power
    52

    Re: IC-303 System and User Software ISOs

    honestly, im a "if it ain't broke, don't fix it" kind of guy.
    if it is fully functional then let it be until there is an issue.
    then maybe we can look up an appropriate patch if needed.
    also, isnt 3.0 windows 7? the older ones are XP based i believe.
    how much ram is installed? i think the 3.0 upgrade kit had a new bios and 2 more gig of ram.

  10. #10
    Technician
    IC-303 System and User Software ISOs


    Join Date
    Sep 2019
    Location
    Athens
    Posts
    30
    Rep Power
    1

    Re: IC-303 System and User Software ISOs

    Quote Originally Posted by Synthohol View Post
    honestly, im a "if it ain't broke, don't fix it" kind of guy.
    if it is fully functional then let it be until there is an issue.
    then maybe we can look up an appropriate patch if needed.
    also, isnt 3.0 windows 7? the older ones are XP based i believe.
    how much ram is installed? i think the 3.0 upgrade kit had a new bios and 2 more gig of ram.
    No clue if 3.0 is Win 7 based, but v2.1 is certainly Win XP.

    Only 1 GB is installed right now, so I am guessing 3.0a is a no go?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here