C258 Set default tray

[JDR]

Hi guys,
I have an issue with the default tray fro internal prints.
For example, if i print the demo sheet of the bird, the tray set by default is the number 2. I'd like for each internal prints, tray 1 be selected. Anyone knows how to ?

i have tested commun settings for paper settings : utility > user settings > system.
I tried in user settings > print settings > paper settings > default tray > 1.
Dunno where...

[copier addict]

There is a selection that reads "print lists". Or something like that. It should allow you to select a tray from there.

[jalaoly]

Hi! Guys


user settings > system settings > paper tray setting>print list and choose your paper tray

[JDR]

well i shoud not be understandable.
I know how to choose a tray for an internal print.
The issue is when (for example) i want to print a bird, without touching the screen, the tray 2 is selected.
I would like the tray 1 to be selected (by default).

how to fix that ? (maybe is that a softsw)

[jalaoly]

ok
if you are on select auto to copy mode and on the printer driver

user settings > system settings > paper tray setting>auto tray select setting
auto tray select=>select all tray excep by-pass
tray priority => up tray 1 first.

[JDR]

Sorry, still the same :/

[tsbservice]

I have no idea but if other don't work, you can try this:

[Utility]
[Administrator Settings]
[Copier Settings]
[Specify Default Tray when APS Off]

Select:

[Default Tray] Switches to Tray1.

[jalaoly]

hi

On copy mode,select tray 1
user settings>copier setting>default copy setting>current setting

[kingarthur]

When I print the "bird" demo sheet, the machine asks which tray i want to print from.....

[emujo2]

Print list selection is for test prints, IP config page, PS PCL fonts, fax report..You can default these to whichever tray you wish and posted a few comments above.