Fiery server problem IC-413

[blazy]

But your version does not support this kind of installation. I got a hold of old v1.0 software with windows xp, and I got everything working but the problem is that my KM PRO 6000L says that "Controler is not connected". On the CWS it says "Establishing serial connection". I tried to clean connectors and the error is still the same. Do I need any patch to make it work ?

Thanks

[arahael]

yes. you need patch 18ldjr

[Synthohol]

PM sent

[blazy]

Thanks everyone, I finaly got it working!

[marli]

can you send me a copier of old ver 1.0 for ic-413?

But your version does not support this kind of installation. I got a hold of old v1.0 software with windows xp, and I got everything working but the problem is that my KM PRO 6000L says that "Controler is not connected". On the CWS it says "Establishing serial connection". I tried to clean connectors and the error is still the same. Do I need any patch to make it work ?

Thanks

[Walterj]

[QUOTE = blazy; 1209809] Hola a todos,

tengo un problema con mi servidor de fuego IC-413, y el problema es que está atascado al iniciar el logotipo de Windows.

El primer problema fue que mi disco duro con Windows XP (Fiery v1.0) se averió y ya no fue reconocido. Así que traté de instalar una versión más nueva de Fiery v1.1 en una nueva SSD. Después de hacer eso, las ventanas comenzaron, pude cantar en Admin normalmente. Después de un par de segundos, el Fiery comenzó a cerrar el proceso. Después de intentar reiniciarlo, Fiery se atascó al iniciar el logotipo de Windows y ya no puedo arrancar.

Podría intentar reinstalar la versión anterior de Fiery (v1.0) pero no tengo una. Póngase en contacto conmigo a través de PM si alguien está dispuesto a compartirlo conmigo.

Si alguien tiene una solución, estaría muy agradecido.

(Perdón por mi inglés) [/ CITA]


good day
I recommend you load the fiery operating system.
IC413 111 System.iso
IC413 111 User.iso
Remember that you must first burn the CDs with the operating system and user system
This loads it to an 8GB capacity USB and formatted in FAT 32
All this you do with the tool (USB Prep Tool application)


Regards.

[plnewton]

sorry to dig up an old thread but I am having this exact same problem

I was running version 1 Windows XP and the drive died so I have installed a new drive but the only version of IC413 is the win 7 version and when I load the OS it just hangs on the microsoft starting screen

Can you please tell me how you managed to get it to work? i have been at it for 2 days now and I have not had any success