Thanks tsbservice.
I saw that on the Konica website but I can't see how that would cause wrapping around the reg roller. Did you experience something similar and this fixed it?
Thanks tsbservice.
I saw that on the Konica website but I can't see how that would cause wrapping around the reg roller. Did you experience something similar and this fixed it?
Hi CloneTJ, didn't experiece wrapping around the reg roller yet and it's more than likely reg section in this case. Just wanted to extend a bit possibilities.
I hope you will have good luck with this. Ken may be not as frequent user as others here but I think he will see your question and respond.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Thanks again tsbservice!
I appreciate the none snarky responses.
Snarky responses are required....
Hahahah...........too true!
Generaly, on all machines for 30-03 jam, I replace registration clutch.
Had this duplex jam issue before and we replaced the entire exit unit, problem was solved but next time I'll have an eye on that solenoid. That wobbly timing belt that's driving the duplex-exit is also a bit of a joke.
Yes maybe it could have been the registration clutch. It was a brand new machine out of the box and the registration unit fixed the problem and did not go on from there. The unit is in the is in the field and, knock on wood, have not heard from the customer. Have had other weird problems with the i series, but, so far so good.
KEN
Bookmarks