Thanks:
0
Likes:
0
Dislikes:
0
-
C3110 Black Image Unit
Have a customer that we sent a black image unit for them to replace last week. No too bad, easy to do. Today I get a call saying that the black image unit needs to be replaced. I go to the customer and the black IU is at 0%. We are using OEM supplies. Come back to the shop and we don't have any new ones and so I took one out of a machine that we have sitting here. Go back to customer and put that IU in and it still says 0% and need to replace! I know that that IU was not all used up. So I found the setting in the service mode to extend the IU life and turned it to extend and as soon as I did that it started printing. So I guess did we get a bad IU and when we get more in should I put a new one in to see if it resets the counter. Have not seen anything about this on KM website.
Thanks
KEN
-
Re: C3110 Black Image Unit
check the UI chip connector is not loose or damaged. The other problem could be eeprom.
-
Re: C3110 Black Image Unit
Once the chip gets blown all it does is tell the machine that the IU is present. The machine does the counting not the chip.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks