Bizhub c3350 switch 5 setting for toner issue?

[mrfuser]

Anyone know what the setting should be for software switch 5 to alleviate cartridge problem?

[Synthohol]

wasnt it engine dip sw 34?
yes engine sw 5

4.25.5 DetailsofEachFunction-Choiceoftoneremptyrecoverymode
(1) Use
4 To perform the auxiliary toner replenishing sequence when the old toner cartridge is replaced after a toner-empty condition.
4 OFF: Not performed (default)
4 ON: Performed
(2) Procedure
1 Touch Service mode, -> Engine FW DipSW.
2 Touch 5, select ON, and touch OK.
3 Touch Close and exit from the Service Mode.
4 Be sure to exit service mode BEFORE powering off the machine

[mrfuser]

Below fix doesn’t exist on c3350 that we could ever find.

wasnt it engine dip sw 34?
yes engine sw 5

4.25.5 DetailsofEachFunction-Choiceoftoneremptyrecoverymode
(1) Use
4 To perform the auxiliary toner replenishing sequence when the old toner cartridge is replaced after a toner-empty condition.
4 OFF: Not performed (default)
4 ON: Performed
(2) Procedure
1 Touch Service mode, -> Engine FW DipSW.
2 Touch 5, select ON, and touch OK.
3 Touch Close and exit from the Service Mode.
4 Be sure to exit service mode BEFORE powering off the machine