Results 1 to 2 of 2
  1. #1
    Service Manager 1,000+ Posts
    Bizhub c3350 switch 5 setting for toner issue?

    mrfuser's Avatar
    Join Date
    May 2007
    Posts
    1,450
    Rep Power
    0

    Bizhub c3350 switch 5 setting for toner issue?

    Anyone know what the setting should be for software switch 5 to alleviate cartridge problem?

  2. #2
    Certified Konica Expert 2,500+ Posts
    Bizhub c3350 switch 5 setting for toner issue?

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    3,449
    Rep Power
    121

    Re: Bizhub c3350 switch 5 setting for toner issue?

    wasnt it engine dip sw 34?
    yes engine sw 5

    4.25.5 DetailsofEachFunction-Choiceoftoneremptyrecoverymode
    (1) Use
    4 To perform the auxiliary toner replenishing sequence when the old toner cartridge is replaced after a toner-empty condition.
    4 OFF: Not performed (default)
    4 ON: Performed
    (2) Procedure
    1 Touch Service mode, -> Engine FW DipSW.
    2 Touch 5, select ON, and touch OK.
    3 Touch Close and exit from the Service Mode.
    4 Be sure to exit service mode BEFORE powering off the machine
    We know a thing or two because we've seen a thing or two.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here