Thanks: 
Likes: Hello, the copier restarts when it receives a print job from the network . C D341, C D262 errors are recorded while. Disconnecting the HDD does not help. Firmware upgrade also does not start . We will be grateful for any advice, thanks.
Dislikes: 0
Hello, the copier restarts when it receives a print job from the network . C D341, C D262 errors are recorded while. Disconnecting the HDD does not help. Firmware upgrade also does not start . We will be grateful for any advice, thanks.
Hi, don't disable HDD or do anything.
After 3 reboots, the 758 will display "Recover data". You press on recover data and the MFP will recover after reboot.
This happens when communication occurs between boards for meters and other information (about every hour) and at that moment there is a power blackout or something abnormal.
I will proceed like that:
1. [System 1] -> [Initialization] -> [Clear All Data]
2. Backup the HDD, format the HDD(s).
3. Run in Service Mode -> [State Confirmation] -> [Self-diagnostic] -> [Check All]
Also worth to mention that CD262 is about - Extension network adapter installation error - Wireless LAN Upgrade Kit (UK-212) not correctly installed or has failed.
So if any installed, check them.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
It was a problem with the contacts on the boards.
which boards?Originally Posted by pinspin
Posting Permissions
Reply With Quote
Bookmarks