Good afternoon.
I'm on a C368 bizhub, but the option is disabled.
Is there any dipsw or some configuration for the option to be unavailable on the panel?
Nothing in the configuration manual, just installation
Thanks
Good afternoon.
I'm on a C368 bizhub, but the option is disabled.
Is there any dipsw or some configuration for the option to be unavailable on the panel?
Nothing in the configuration manual, just installation
Thanks
Try firmware. Then emmc board faulty
Are you positive that in System 2 - Import config data - BootUp screen tab is missing?
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
this may be a result of USB connection settings being disabled, or enhanced securty set to ON. E
current firmware G00-K7
enhanced security disable
USB enable
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Good morning guys.
The solution for my case was to format the HDD in physical, disable HDD, base firmware until the most recent, format SSD, enable HDD, format logic, and finally the option I needed appeared.
Thanks.
Bookmarks