Konica minolta bizhub c454 ,how to make it straight
Sent from my TA-1021 using Tapatalk
Konica minolta bizhub c454 ,how to make it straight
Sent from my TA-1021 using Tapatalk
Is your feeder DF-624 or DF-701?
Check that it is closing properly and that there is something in the paper path obstructing it
adjust screw on right hinge (standing in front of machine). The adj screw sits horizonal.
Best to get service manual which shows proper adjustment procedure
It's common job for a tech. Either ADF not properly adjusted or machine moved by pushing on ADF.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks