Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 26
  1. #11
    Technician
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    The registration seems to be ok and mind you this jam happens after the paper has passed it.

  2. #12
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    762
    Rep Power
    14

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    How are the internal gears that make the 2nd transfer roller spin?

  3. #13
    Indentured Servant 500+ Posts D_L_P's Avatar
    Join Date
    Oct 2009
    Posts
    941
    Rep Power
    33

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Quote Originally Posted by Khumz View Post
    HI guys
    I have a bizhub 227 which jams paper before it enters fuser unit, actually the paper gets shrinked right under the fuser unit. Its coming up with error code 30:03 which points to exit sensor PS3, i changed all suggested components but still get jam at the same point. But if i remove image roller the paper goes through but without anything copied of course. Anyone with suggestions please help. My client is desparate.

    ....Khumz

    I know 423 isn't the same as a 227 but I think they are similar enough this might help:

    KM 423 Jam Code 30-01

  4. #14
    Technician
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Quote Originally Posted by Bix View Post
    How are the internal gears that make the 2nd transfer roller spin?
    please explain a little bit

  5. #15
    Service Technician 250+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    257
    Rep Power
    21

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Have you removed the fuser and inspected it? Since it's obviously not getting pulled into the fuser (paper just falls out when you open the door), that is where I would start.

    Maybe there is still a sheet of paper accordion jammed in the fuse entrance blocking the path. Try turning the fuser by hand and see if it will turn. If it's not turning I would expect a service error, but if one of the drive gears is broken or something, it's possible the copier sees the drive motor turning and thinks everything OK.
    Ricoh Service Tech for 7 year, now a Konica Minolta Service Tech for the last 6 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

  6. #16
    Technician
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Hi Femaster....
    The fuser unit is fine because if i remove image roller and run a copy the paper goes through the fuser unit right to the exit and both fuser unit and paper will be hot.

  7. #17
    Technician
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    The image roller is driven by the image drum, so what difference does it make with or without the image roller. I mean other than pulling the paper through what other roll does it do?

  8. #18
    Service Technician 250+ Posts femaster's Avatar
    Join Date
    May 2011
    Location
    A Small City in MI
    Posts
    257
    Rep Power
    21

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Quote Originally Posted by Khumz View Post
    Hi Femaster....
    The fuser unit is fine because if i remove image roller and run a copy the paper goes through the fuser unit right to the exit and both fuser unit and paper will be hot.
    Sorry about that, I looked back and I apparently missed the post where you had mentioned that the fuser had been replaced and that paper does go through if you remove the transfer roller.

    I was looking through the recent parts manuals and I see that the 227 has had a "refresh". There are some fairly significant parts changes in the transfer/duplex assembly and the exit assembly. I have not yet found any information as to why this was done, but perhaps the problem you are having might be due to something they have corrected in this refresh. Unfortunately, I haven't been in front of very many 227 style machines, so I haven't come across much with them and at this point I'm out of ideas.
    Last edited by femaster; 3 Days Ago at 08:28 PM.
    Ricoh Service Tech for 7 year, now a Konica Minolta Service Tech for the last 6 years.
    My Ricoh knowledge is slowly dwindling away at this point. Many things have been lost to time...

  9. #19
    RTFM!! 2,500+ Posts allan's Avatar
    Join Date
    Apr 2010
    Location
    Centurion
    Posts
    3,670
    Rep Power
    74

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    Is you drum scratched on the in side? The transfer roller gets driven from the drum unit check if the contact on the gears are ok could be that its not rotating.
    Found that the customers can miss form the metal guide plate on the transfer roller assy, but that will cause the drum to scratch on the far side.

    Your missing something simple.
    Whatever

  10. #20
    Technician
    Join Date
    Feb 2020
    Location
    Gaborone
    Posts
    13
    Rep Power
    1

    Re: Konica Minolta Bizhub 227 paper jam before fuser

    I m working on it again tomorrow morning. Yes i can see I m missing something simple. I have to figured out why it does not jam when i remove the second image transfer roller. Again before it started jamming paper it could copy but there was some uncomfortable noise when copying. But now i do not here that noise anymore which makes suspect that maybe the drum unit is not running.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here