Is it possible to turn off the warnings on the copy/scan screen the messages like L-1, L-2, L3, L4 - "PRT/IR Errors?"
The few people that notice this "error" react like they think these machines are about to spontaneously combust!
Thanks
Is it possible to turn off the warnings on the copy/scan screen the messages like L-1, L-2, L3, L4 - "PRT/IR Errors?"
The few people that notice this "error" react like they think these machines are about to spontaneously combust!
Thanks
Last edited by Synaux; 02-23-2020 at 08:05 AM.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Just undo these switches if it has no effect. Been some time since i needed them.
Think SW51 HEX F0 is for life stop and SW55 HEX 0C is to disable on screen display.
Not sure if you need a specific firmware version.
Whatever
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I think you are correct.
I will go ahead and try the switches Allen suggested by the end of the week, but I thought on these models, the switches weren't necessary. I know the cx50s needed special FW in conjunction with the switches. As noted, I already changed the stop - 0 - 9 option.
Bookmarks