Thanks: 0
Likes: 0
Dislikes: 0
After formatting SSD of Bizhub 223 in (Administrator seating/security seating /SSD seating /SSD format) without any prior backup.
Now Machine is on Ready to copy, Scan the documents but could not print it, processing light goes orange and machine shows ready to except next job.
Please help to resolve this issue.
This old machine has no SSD. It may be HDD disabled in service mode, check it.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I seem to have found a similar option on Bizhub 4e series. I think you're talking about SSDB. But I think it is not necessary to format SSD(B) if the MFP does not require it.
Not sure what you've done, or why, but it sounds like the format process may have set your consumables to their life limits. The job log should give you a clue..Post what you find. (the IUs can only run so far before hitting life stop, 150% I think). E
Reply With Quote
Bookmarks