Side tracking a bit here.
Back at you: YouTube
If i only had an LTD like that...
I roll with the Spirit
Side tracking a bit here.
Back at you: YouTube
If i only had an LTD like that...
I roll with the Spirit
Whatever
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Let me correct myself.
To get the prints darker sould not take too long as it needs to add toner.
Reducing the density would take that long.
Did you add a small amount of toner and the ran dev init?
You can always add but if you dose in with too much toner is would fog up the machine or give you nasty background.
Whatever
Hello guys, I returned to work after long time due to pandemic.
So today I turned off Drum Potential Sensor with dipswitch, tried to print a number of sheets and density started becoming higher, after 30 pages it became excellent. So as it seems DPS is dead there and I'm going to change it with new one.
Thank you all for your suggestions and attention!
Bookmarks