Results 1 to 4 of 4
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Oct 2008
    Location
    Long Island, NY
    Posts
    441
    Rep Power
    37

    C3350i error CE301 after firmware update

    The i-series machines just came out with a new mandatory firmware update (G00-7B). On my first attempt to do it, the machine came up with a CE301 code after rebooting. Rolled the firmware back and it's fine. Any ideas?

  2. #2
    Certified Konica Expert 2,500+ Posts
    C3350i error CE301 after firmware update

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,987
    Rep Power
    217

    Re: C3350i error CE301 after firmware update

    Did you read the reade file for that firmware?
    Have you changed bit sw 25 to hex 10?
    Just asking, where does it say it's mandatory?

    There is a bulletin on this.
    That stupid marketplace screws it all up.


    E301 occurs when updating firmware to function level 2.0.
    Solution
    CAUSE: MarketPlace anomaly

    SOLUTION: If the E301 occurs after updating firmware to (G00-75/G00-79/G00-7B) perform the following steps
    1. Install firmware G00-45. The latest version firmware is available for download via One Stop Product Support.
    2. At next boot up Enter Admin mode/Network settings/IWS/turn MarketPlace OFF
    3. Install latest base G00-7B or G00-2B depending on the MFP
    4. At next boot up machine should be tested
    5. Turn MarketPlace back ON through Admin mode/Network settings/IWS/turn MarketPlace ON
    6. Install the correct Movie and Voice data for Function version 2.0


    No Part replacement is needed to correct this issue.

    Note: This issue has been escalated to Japan, at this point use the workaround to resolve the issue. This solution will be updated when a final resolution is obtained.
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,143
    Rep Power
    346

    Re: C3350i error CE301 after firmware update

    1. Install firmware G00-45.
    2. At next boot up Enter Admin mode/Network settings/IWS/turn MarketPlace OFF
    3. Install latest base G00-7B
    4. At next boot up machine should be tested
    5. Turn MarketPlace back ON through Admin mode/Network settings/IWS/turn MarketPlace ON
    6. Install the correct Movie and Voice data for Function version 2.0
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Oct 2008
    Location
    Long Island, NY
    Posts
    441
    Rep Power
    37

    Re: C3350i error CE301 after firmware update

    Yeah, I did that before I even tried it.

    And for KM employees, they're saying to do it on a next call basis, and tracking it by a modification part #.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here