Konica minolta C8000

[sisirakj]

Hi dear all
I replace my Konica minolta c8000 PRCB
Unfortunately , It ask for firmware for PRCB

any can send PRCB firmware

my email sisirakj@gmail.com

[Takhnamishvili]

Hi dear all
I replace my Konica minolta c8000 PRCB
Unfortunately , It ask for firmware for PRCB

any can send PRCB firmware

my email sisirakj@gmail.com

As I know, there are no firmware for only PRCB, you have to update engine firmware, finishing options firmware and controller firmware to the latest ones.

[sisirakj]

Dear

firmware can be updated separately
there is OACB board assembly,
PRCB board
and finishing unit

each board firmware can be separately updated

my printer has version 60

if anyone can provide file for USB pen drive update it is better

Thanksc8000_firmware_.jpg

[Synthohol]

PM sent.
thanks for contributing!!

[Takhnamishvili]

Dear

firmware can be updated separately
there is OACB board assembly,
PRCB board
and finishing unit

each board firmware can be separately updated

my printer has version 60

if anyone can provide file for USB pen drive update it is better

Thanksc8000_firmware_.jpg

I know that they are separately, but it is not recommended to update only one of them, stable working of printer is not guaranteed in that case. If you update firmware of one of them to the latest one, you must update firmware of others to the same version too.

[sisirakj]

Ok Takhnamishvili

actually thanks for advise
and i have not done this before

do you have this firmware file

or where can i get it

if you have please inform me to sisirakj@gmail.com

thanks

[Synthohol]

sisirakj

check your PMs.
thanks for contributing

[Takhnamishvili]

Ok Takhnamishvili

actually thanks for advise
and i have not done this before

do you have this firmware file

or where can i get it

if you have please inform me to sisirakj@gmail.com

thanks

You're welcome. You can call KM service engineer for updating firmware, or maybe someone on this forum can send it to you.