If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Update:
Finally got the CPUB. The manual warns about swapping in used parts or changing both CPUB and Storage Board at the same time. It installed like the manual suggested, but no change. It defaulted back to "Internal error auto cancel" to ON (#2 & #3). When I turned it back OFF I see the C-40A6 error. After 10 attempts I got only the first page of the counter report.
I noticed that the Memory Type default in the manual is microSD ... so I changed from Storage to microSD just for kicks, but it immediately errors out C-D073.
Also I ran the memory tests. All were successful except "memory_PRT". Most times it did nothing. After a couple of re-boots it came up OK, OK. I interpret this to mean that the BaseB cannot always access the print memory ... perhaps the source of the errors.
So I've ordered the BaseB. That's where we're at so far. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Although not directly related to this error, I went out to my only C-3350i today for a different problem, but the machine was not recognizing the (installed) Tray 2 option... It too is at level -45 F/W so I'm wondering how buggy it really is...I'm going to go back and upgrade it, but I hope I don't have to do a complete re-Initialization, which will erase a lot of the customer settings. You know, the thing that comes to mind most about this, is how much the sales rep (from Konica or Muratec, whichever it was) was SO HAPPY that these new machines were MADE BY Konica Minolta, and not from whatever 3rd party company that made the C-3350/350 series for them... sheesh... I love how the salespeople can just BELIEVE what they're told, even though they have no clue what its like on the front lines/in the field the way a tech is! Nor anything about the technology behind the machine, whatsoever! Just about every time (over the course of 40 years) that I've been told by a salesperson that this new machine is "fantastic" and it turned to be a pig/lemon, I wish I had a dime... I'd be RICH....
OC
I finally got an opportunity to follow up on this machine. The BaseB did not solve the issue.
I don't understand what else it could be. The error is a communication error between the CPUB and the BaseB. The CPUB nests right on top of the BaseB, so there is no harness, no additional connectors that haven't been replaced.
I gave some brief thought to the storage memory, but it passes all the memory tests and the Full Diagnostics.
I'm passing this one back to the salesman. With only 3000 total prints we should be able to RA this buggy POS. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Feel sorry to hear that BC. Anyway Thanks for the ending of thread.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Hi All
Can I jump in on this one. We had same issue today with a Error - C40A6 and fault was caused by a short on the RFID chip of the black toner cartridge. Worth also checking contact pins to see if bent and causing short bringing down 3.3v line.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
No board replacement. 👍
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks