Page 6 of 6 FirstFirst 123456
Results 51 to 53 of 53
  1. #51
    Junior Member
    Join Date
    Oct 2014
    Posts
    5
    Rep Power
    0

    Re: Konica Minolta C360i

    Hi, I have the same problem ...
    I replaced the STRB and now the machine loads the firmware successfully. But it still doesn't start. It stops at 25%
    I cannot access the service mode. In a previous post I read about warm boot ... (how do you do it?)
    Thanks for the replies

  2. #52
    Service Manager 1,000+ Posts Gift's Avatar
    Join Date
    Mar 2011
    Location
    Gothenburg
    Posts
    2,316
    Rep Power
    86

    Re: Konica Minolta C360i

    Quote Originally Posted by uullxx View Post
    Hi, I have the same problem ...
    I replaced the STRB and now the machine loads the firmware successfully. But it still doesn't start. It stops at 25%
    I cannot access the service mode. In a previous post I read about warm boot ... (how do you do it?)
    Thanks for the replies
    In same cases you have to let the machine alone for a while like something is happening in the background that can take >30 minutes.
    Did you used a new STRGB? IIRC in rare cases a faulty CPU board can cause this, too.

  3. #53
    Junior Member
    Join Date
    Oct 2014
    Posts
    5
    Rep Power
    0

    Re: Konica Minolta C360i

    Ok, today I mounted a new CPU board and the machine is working fine.
    I also tried to install the old STRB but it doesn't work
    Thanks for the reply

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here