fiery disconnecting

[beetle73]

Fiery disconnects from machine.
Machine does not go to sleep
Lan is disconnected

[Synthohol]

ok, so can you open remote desktop and view the system and event logs in windows?
might be a clue there.

[emujo2]

I missed the post about it being a production Fiery..This changes everything I mentioned..Now it sounds more like a IC OS setting or issue.

[beetle73]

FYI
Problem solved by installing nvram data from a working machine

[tt_konica]

Hello, I'm having the same problem with Fiery IC-415 on Konica Minolta C1070. The Fiery is a Linux OS and it will disconnect from the printer and the network about 2 to 3 times a day. I've have to restart it to connect again. The code on the back of the Fiery is 00.

Here are the things I've done so far:

1. I've done a clean reinstall
2. Installed a new hard drive
3. Changed/upgraded the power supply
4. Disabled "Fiery Health Monitor" -- another forum claims this should solve the problem
5. Changed "Network Speed" to "100Mbps Full-Duplex" from "Auto" -- another forum claims this should solve the problem
6. Turned of "SNMP" -- another forum claims this should solve the problem.

All the above did not solve my issue.

@beetle73 -- how can I install NVRAM data?

FYI
Problem solved by installing nvram data from a working machine

[Synthohol]

Problem
Fiery disconnects and requires a reboot.
Solution
CAUSE: Power Synchronization is set to OFF in Fiery Configuration.
SOLUTION: Set Power Synchronization to ON.

just something else to check.

[tt_konica]

Thanks for your suggestion. Power Synchronization has always being set to ON in the Fiery Configuration.

Problem
Fiery disconnects and requires a reboot.
Solution
CAUSE: Power Synchronization is set to OFF in Fiery Configuration.
SOLUTION: Set Power Synchronization to ON.

just something else to check.