Develop Ineo+ 224 -
Getting Error - This is Invalid External Memory while updating Firmware.
For other machines same USB works fine. Even tried another USB but same error.
Please advise.
Thanks and Kind Regards,
Develop Ineo+ 224 -
Getting Error - This is Invalid External Memory while updating Firmware.
For other machines same USB works fine. Even tried another USB but same error.
Please advise.
Thanks and Kind Regards,
Was anything done before updating like replacing boards or HDD? Also, make sure you're formatting the USB drive before copying firmware.
id try backing up the addressbook and do a full data clear.
reenable the HDD and load movie data.
it usually takes FW after that.
/.02
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Agree with above replies. If pre-history depends on what is it. If nothing was done prior I will just follow what Synthohol suggested. Side note, make sure you've correct FW for the model.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
is the konica equivalent a 224e? there was no 224 non e.
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Dear Friend.
Can you share the display picture of the copier what exactly you facing the problem.
pm sent
We know a thing or two because we've seen a thing or two.
Also don't ask me for files without a contributor badge.
Bookmarks