Develop Ineo+ 224 - Invalid External Memory while updating Firmware

[mga]

is the konica equivalent a 224e? there was no 224 non e.

Konica C224 is Develop +224
In my Develop cross ref shows Konica C224e develop +224e

[mearmi]

Konica C224 is Develop +224
In my Develop cross ref shows Konica C224e develop +224e

You are Right. It is C224 not C224e

Anyone has latest firmware and movie file for C224?

Many thanks.

[tsbservice]

Check your PM in 5 min.

[Simza]

Hi Friend,
i have face this problem also manytime,
you have to check.
-formatting the USB (FAT32)
-make shure that you have e-version data or normal 4serial FW-data
-Dont use Kingstone....USB. U need simple noname USB, because minolta dont check many USBs.

Best of luck
Stay Safe

[mearmi]

pm sent

Thanks a lot everyone.

Re seated SSD , Changed the RAM. Updated the firmware. And finally Changed the SSD from Non e Version. But no luck.

Still same issue.

Any advice.

Thanks once again.

[tsbservice]

What is exactly issue now?

[mearmi]

What is exactly issue now?

Machine keeps on rebooting for 2-3 times and then error code appears C-2650

[mearmi]

Thanks a lot everyone.

Re seated SSD , Changed the RAM. Updated the firmware. And finally Changed the SSD from Non e Version. But no luck.

Still same issue.

Any advice.

Thanks once again.

Machine keeps on rebooting for 2-3 times and then error code appears C-2650

[Bix]

Data corruption may have occurred between SSD, MFPB and/or PRCB. Also I'm not sure that Develop has the same firmware as Konica Minolta, even if the model is identical.

[tsbservice]

... Also I'm not sure that Develop has the same firmware as Konica Minolta, even if the model is identical.

Hmm that may be something. For newer models like 8 series FW from KM should work on Develop analog but on 4 series?