Results 1 to 7 of 7
  1. #1
    Service Manager 2,500+ Posts
    You won't believe it.......

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,199
    Rep Power
    94

    You won't believe it.......

    Bizhub 350, yes the old dinosaur. Have still a few of these machines with coin-op. One of them got a new PWBA and since than the "Vendor Mode" disappeared (TechRep>Stop9>MeterCount) All possible entries for the counters are shown but not the "Vendor Mode" which is missing.

    Machine has ofcourse the "Latest&Greatest" Firmware.
    Any ideas please?

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "

  2. #2
    Certified Konica Expert 2,500+ Posts
    You won't believe it.......

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    North Jersey
    Posts
    4,982
    Rep Power
    217

    Re: You won't believe it.......

    is there a HDD? is it on?
    We know a thing or two because we've seen a thing or two.
    Also don't ask me for files without a contributor badge.

  3. #3
    Service Manager 2,500+ Posts
    You won't believe it.......

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,199
    Rep Power
    94

    Re: You won't believe it.......

    Nope

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "

  4. #4
    Service Manager 1,000+ Posts
    Join Date
    Mar 2017
    Posts
    1,572
    Rep Power
    73

    Re: You won't believe it.......

    This may be a firmware issue...

    Older Firmware
    1. On the basic screen, hit the “utility/counter” button.
    2. Touch “Check Details” on the touch panel.
    3. Press “Stop”, “0”, “0”, “Stop”, “0”, “1” to enter Tech Rep mode.
    4. A password is required. Key in 00000000 or 12345678 and press “End”.
    5. Once in Tech Rep mode, Press “Stop”, “9”.
    6. Touch “Key counter” and change the setting to “Yes”/”Set”/”ON” (depending on firmware version) and press “End”.
    7. Touch “Vender mode” and choose “Coin” from the selections. Touch “End”
    8. Press “Auto Reset” to get out of the current menu.
    9. Press “End” to get out of Tech Rep mode.
    10. Once back on the basic screen “Insert coin” should be displayed if done correctly.

    Newer Firmware
    1. On the basic screen, hit the “utility/counter” button.
    2. Touch “Check Details” on the touch panel.
    3. Press “Stop”, “0”, “0”, “Stop”, “0”, “1” to enter Tech Rep mode.
    4. A password is required. Key in 00000000 or 12345678 and press “End”.
    5. Once in Tech Rep mode, Press “Stop”, “9” to access Count mode.
    6. Touch “Management Function Choice”.
    7. Choose “Vender 1”. Verify if “type 1” is selected and touch “End”.
    8. Press “Reset” to get out from the current menu.
    9. Exit completely from tech rep mode.
    10. Once back on the basic screen “Insert Coin” should be displayed if done correctly


    Also, vendor mode is not available if account track/user authentication is enabled..Used PWB might have something to do with this. E

  5. #5
    Service Manager 2,500+ Posts
    You won't believe it.......


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    3,851
    Rep Power
    133

    Re: You won't believe it.......

    Been awhile since i worked on that model but can you initialize the machine like newer models? My thinking is wipe all the settings and start fresh.

    Maybe a softswitch setting?

  6. #6
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,138
    Rep Power
    346

    Re: You won't believe it.......

    Quote Originally Posted by copyman View Post
    Been awhile since i worked on that model but can you initialize the machine like newer models? My thinking is wipe all the settings and start fresh.

    Maybe a softswitch setting?
    Maybe an idea to do memory clear via Jumper across TP1 and TP2.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  7. #7
    Service Manager 2,500+ Posts
    You won't believe it.......

    Hansoon's Avatar
    Join Date
    Sep 2007
    Posts
    3,199
    Rep Power
    94

    Re: You won't believe it.......

    Machine is working again but it needed another PWB-A.

    Thanks for your support gentlemen.

    Hans
    " Sent from my Intel 80286 using MS-DOS 2.0 "

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here