Anyone know what the difference is between the c554 and c454 fusers?
Anyone know what the difference is between the c554 and c454 fusers?
A2XKR71044--c554
A4FJR70244--c454
Probably wired different and drive gear differences.
Two things. The electrical connection are different. The c554 has much bigger bearings supporting the fuser sleeve roller. The c454 has the small bearings that disintegrate.
Thanks. The C554 has cleaning roller bushings that are toast along with the cleaning roller. Now to find part numbers for ordering . Lots of fun
Probably the most common issue with the models that use that style fuser.
Brush Cleaning Roller A2XK740400
Teflon Cleaning Roller A2XK740301
Cleaning roller bushing A2XK742901
Brush roller bushing A161771000
There may be new style / color bushings?
Ball bearing 4120550302
The small bearings that disintegrates is used in a lot of finishers, FS 527, FS 534, etc. I take them out to use in these fusers when I strip parts off finishers before trashing.
Also wanted to add I've seen both cleaning rollers removed and machine ran 100's of thousands prints with no fuser issues. All single side of course, don't think it would hold up well with a lot of 2 sided.
I've personally left the cleaning rollers out out for a few weeks while getting parts and returning. No unusal build up on rollers, etc. Rollers look fine. Think you could leave them out permanently on high volume account that run mostly 20lb plain paper single side only, but don't hold me to it
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Started in the copier service business in the fall of 1988 and worked at the same company for 33.5 years, becoming the senior tech in 2004 but left to pursue another career on 4/29/22.
Bookmarks