search BT2012139EN I don't have the English version but in Italian.
The document talks about the problem with the temperature sensor that can give various problems, maybe it can concern you
search BT2012139EN I don't have the English version but in Italian.
The document talks about the problem with the temperature sensor that can give various problems, maybe it can concern you
yes the temperature sensor .............. if in:
Service Mode / State confirmation / Temp / Humidity / Atmospheric pressure.
the temperature is zero replace the temperature sensor
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
you're right I think like you.
in the c3350i series, with early firmware there was this problem of high toner waste, but here I believe there is an electronic or sensor problem not working properly.
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Do you have much C2552/4/6/8? Defektiv Developer chip.
Bookmarks