KONICA C454e CE PASSWORD RESET TO DEFAULT WITHOUT CHANGING THE SSD

[SMARTENGCENTER]

did you try 9272 twice instead of 4 times?

Friend i have tried everything 9272927292729272 actually machine counter is 20k and someone changed the CE password and admin password too.

[mga]

Friend i have tried everything 9272927292729272 actually machine counter is 20k and someone changed the CE password and admin password too.

On Konica engineers site they do a mfp reset tool best to call a current credited service engineer good luck

[SMARTENGCENTER]

hell he doesn't even have a manual for this model....

Friend i dont see manual a lot while repairing machines mostly i know the codes of the machines and sometimes when i stuck then i see manual of 364e black and white machine because 4 series many models codes are same like 224,284,364,454,554
btw i have been working with KM for more then 8 years

[SMARTENGCENTER]

On Konica engineers site they do a mfp reset tool best to call a current credited service engineer good luck

ANY LINK?

[mga]

ANY LINK?

Sorry no this is only available to trained engineers if you look around on some other threads or place a new thread in service manuals someone may help you

[Phil B.]

Friend i dont see manual a lot while repairing machines mostly i know the codes of the machines and sometimes when i stuck then i see manual of 364e black and white machine because 4 series many models codes are same like 224,284,364,454,554
btw i have been working with KM for more then 8 years

i never go to a machine WITHOUT a manual ( even if i don't USE it )

I've been in this industry for 31+ year and KM about 12. I have 3 - 126gb thumb drives of JUST manuals. Never leave the shop without them. I have put techs under me for leaving the shop without being properly equipped and had to waste time returning for the stuff they 'didn't have ' with them.

so drop the pissing contest ... I highly doubt you will win.

[mga]

i never go to a machine WITHOUT a manual ( even if i don't USE it )

I've been in this industry for 31+ year and KM about 12. I have 3 - 126gb thumb drives of JUST manuals. Never leave the shop without them. I have put techs under me for leaving the shop without being properly equipped and had to waste time returning for the stuff they 'didn't have ' with them.

so drop the pissing contest ... I highly doubt you will win.

Correct it's like forgetting your snap on driver.

[SMARTENGCENTER]

i never go to a machine WITHOUT a manual ( even if i don't USE it )

I've been in this industry for 31+ year and KM about 12. I have 3 - 126gb thumb drives of JUST manuals. Never leave the shop without them. I have put techs under me for leaving the shop without being properly equipped and had to waste time returning for the stuff they 'didn't have ' with them.

so drop the pissing contest ... I highly doubt you will win.

i totally agree with but you know friend every person has his own way of work.
Sometimes manual helps a lot while solving the problem.

[femaster]

This is all I will give you as far as what you are looking for. Don't PM me or ask me for any more info; the rest will be up to you. See the PDF attached to the linked post below...

This will at least give you the instructions on it's proper use, finding the proper file will be up to you. These reset files are very dangerous if used improperly, therefore I won't be handing any of them out.

xx4 and xx4e series reset document

[SMARTENGCENTER]

This is all I will give you as far as what you are looking for. Don't PM me or ask me for any more info; the rest will be up to you. See the PDF attached to this post...

c224e counter reset

Thanks for your message the question is from where i will get the file A145FW.tar?
The link you shared I already have seen this before.
No worries I will not PM you but tell me the solution I just need this file from where I can get?