Dislikes:
0
-
Re: Bizhub 363 is not booting, only hourglass continue
Hi,
thank you very much for your support,
i have clear the problem with recovery tool.
1-Copy NVRAM on MFP-Board(Working copier)
2-take the NVRAM out and put in the dead copier. Started it with recovery tool. There was option to recovery. So i have put the data from good nvram to the MFP-Board....
3-Clear the licence error
4-install Moviedata
Copier was working
Have good time
-
Re: Bizhub 363 is not booting, only hourglass continue
Hi,
i have teh same problem with bizhub 223. It shows constantly hourglass.
I have try to solve with "A1UDFW.TAR". but it dosent work. ( using 2gb FAT32 USB stick)
I have try tec.-slot and normal usb. Nothing works.
Any idea?
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks