Getting Error C-2650 in Develop Ineo+ 224
When turn on the printer it reboots 2 times and then getting error code C-2650
In Service Manual it says Main Back Up Media access error.
Trouble type C2650: Main backup media access error
Rank C
Trouble detection
condition
• The re-written data, which has been read out, checked and founded as error, is read out again and found as
error.
• The error was found when reading out the counter value.
• The main body detects that the EEPROM is not mounted.
Trouble isolation -
Relevant electrical parts • EEPROM/1
• EEPROM/2
• MFP board (MFPB)
Kindly advise.
Many Thanks
Bookmarks