Sineo+284sh20051818062.pdfSineo+284sh20051818061.pdfSineo+284sh20051818060.pdfSineo+284sh20051818053.pdfSineo+284sh20051818052.pdfSineo+284sh20051818051.pdf
I have change the laser, I have tried swaping the drums from one place to another, I have change the developes with used ones that where working in other machine but same I got these lines hope you guys can see them.
with all due respect, the scans provided are not what i use to diagnose cq.
only the 1 black gradation page is remotely helpful.
can you print the same original job in monochrome? if there is no fade then black is not the issue.
have you stopped the job at different intervals and looked at the belt and fuser?
need to see if its in development or transfer. this is all process of elimination.
could even be dirty/worn trans belt bushings/roller.
Ok, not drums,devs, laser. Few left like ITB and sensors. Did you cleaned ITB sensors front and rear? Any warnings or codes? Are they using compatible toners? With such old but good model many copy shops are running their business with non genuine toners.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Bookmarks