Thanks: 
Likes: Hi,
i have a mashine i dont know how to get in the System, anyone changed the password,
have i any other way to get in the system settings?
I think i need a nvram reset, but i dont have this jig firmware..
Thanks in advance, for helping..
Dislikes: 0
Hi,
i have a mashine i dont know how to get in the System, anyone changed the password,
have i any other way to get in the system settings?
I think i need a nvram reset, but i dont have this jig firmware..
Thanks in advance, for helping..
what problems are you having?Originally Posted by hory_143
do you have a manual?
If you mean CE mode password is changed from default, yes you will need this FW to change it back to default.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Yes i have the manual but the default pw is changed from the default.
I have some of firmwares but theese dont change this only the nvram reset and i dont have it..
Re: Bizhub c360
If changed from another customer then need Special JIG file.When update this jig file then need setup machine for first time used check user manual for first time setup procedure.
Can anyone send me then firmware?
have you tried all the obvious passwords?
9272927292729272
92729272
12345678
00000000
Yes that was first was i made
i need firware bizhub c280/360 to update please help me my email : truongxuananh1975@gmail.com thanks you
i need firware bizhub c280/360 to update please help me my email : truongxuananh1975@gmail.com thanks you
your prolem i think you should change nv ram pw service on it
Reply With Quote
Bookmarks