Page 1 of 2 12 LastLast
Results 1 to 10 of 16
  1. #1
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    978
    Rep Power
    20

    Which rolls do you prefer to use?

    Konica Minolta has evolved in the type of rollers used in the trayers. Which one do you prefer to use? Do you use original or third-party rollers?
    I currently use those with the included C-Clip:
    A64J564201
    A64J564101

    Its are valid but C-clip break easily if you are not careful.

  2. #2
    Service Manager 1,000+ Posts
    Which rolls do you prefer to use?


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,037
    Rep Power
    32

    Re: Which rolls do you prefer to use?

    Does it matter if you replace blue rollers with red ones. I only bother stocking the A00J563600 and pull the rubber off to use the original shaft so use A00J rubber on a A108 SEP roller shaft.

    I was told like 10 years ago blues lasted longer but haven't really noticed much difference

    Sent from my Nokia 7 plus using Tapatalk

  3. #3
    Trusted Tech 50+ Posts escalante's Avatar
    Join Date
    Sep 2018
    Location
    Miami
    Posts
    68
    Rep Power
    4

    Re: Which rolls do you prefer to use?

    In which model do you use these rollers?

    Enviado desde mi SM-J701M mediante Tapatalk

  4. #4
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    978
    Rep Power
    20

    Re: Which rolls do you prefer to use?

    Quote Originally Posted by escalante View Post
    In which model do you use these rollers?

    Enviado desde mi SM-J701M mediante Tapatalk
    in all models (the rollers are almost all the same). I speak more specifically of the A3 models
    Last edited by Bix; 05-26-2020 at 02:44 PM.

  5. #5
    Service Manager 2,500+ Posts
    Which rolls do you prefer to use?

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,713
    Rep Power
    65

    Re: Which rolls do you prefer to use?

    i use A00J563600 rubbers for everything.
    ive also got the c clips so if i break a lock tang then i just make it like a 4 series

  6. #6
    Senior Tech 50+ Posts
    Join Date
    Apr 2009
    Posts
    82
    Rep Power
    23

    Re: Which rolls do you prefer to use?

    We use OEM rollers. We had lots of problems with Katun rollers about 10-15 years ago. We were replacing clutches, 1 way bearings, torque limiters and sensors before we figured out it was the Katun feed rollers. I think we may have even lost a few customers because of it. Trying to save money with generic parts and supplies will sometimes end up costing you more. Instead of ordering A00J563600, order A0P0R74000. Last time I checked, it was less $. It is the same roller, plus it includes a shaft, torque limiter and clip that you can sometimes use for the sep roller. Sometimes the shaft is different but torque limiter is the same so just use the old shaft.

  7. #7
    Service Manager 2,500+ Posts
    Which rolls do you prefer to use?

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,713
    Rep Power
    65

    Re: Which rolls do you prefer to use?

    i even use the A00j's on Kyoceras. seem to last longer

  8. #8
    Trusted Tech 50+ Posts escalante's Avatar
    Join Date
    Sep 2018
    Location
    Miami
    Posts
    68
    Rep Power
    4

    Re: Which rolls do you prefer to use?

    Quote Originally Posted by Bix View Post
    Konica Minolta has evolved in the type of rollers used in the trayers. Which one do you prefer to use? Do you use original or third-party rollers?
    I currently use those with the included C-Clip:
    A64J564201
    A64J564101

    Its are valid but C-clip break easily if you are not careful.
    And duration has these rollers. Why the part codes are from series 8

    Enviado desde mi SM-J701M mediante Tapatalk

  9. #9
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    978
    Rep Power
    20

    Re: Which rolls do you prefer to use?

    Quote Originally Posted by escalante View Post
    And duration has these rollers. Why the part codes are from series 8

    Enviado desde mi SM-J701M mediante Tapatalk
    my experience, 200k-400k

  10. #10
    Service Manager 1,000+ Posts
    Join Date
    Mar 2013
    Location
    Meridian, MS
    Posts
    1,046
    Rep Power
    34

    Re: Which rolls do you prefer to use?

    Quote Originally Posted by Synthohol View Post
    i even use the A00j's on Kyoceras. seem to last longer
    Good to know!!! ...we have a few kyocera in the field but are slowly swapping them out for 4e series KMBS boxes!!! Kyocera touts long life for their amorphous silicon drums but the charge rollers don't hold up worth a crap! You're lucky to get 100-120 k out of a single charge roller!!!Which rolls do you prefer to use?

    Sent from my SM-N950U1 using Tapatalk
    REACH FOR THE STARS!!!
    Konica Minolta Planetariums!
    https://www.konicaminolta.com/planet...gma/index.html

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here