A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Marketplace never bothered me.
The iSeries have 8GB of RAM, so it should be able to run many applications without crashing if optimized.
In my case, it's always been the bloody STRGB. Here are some cases that the replacement of the STRGB (storage board) solved:
- C250i printer goes offline continuously, even by setting all the network parameters correctly.
- C250i the screen freezes randomly.
- C300i no longer turns on and the screen remains white.
Konica Minolta will hardly admit that the problem is that (they often say it is CPUB or Firmware problem). I managed to pass it under warranty always because I had the demonstration that by replacing that, the C250i / C300i has started working again.
However they are SSD M2, if you have a motherboard in your PC you can use them again and have a faster computer.
We also had 2 cases with faulty eMMC storage board. Not shure what goes on @ KM Development meetings for future models but there must be this one guy insisting to keep these ssd related issue-spirit alive no matter what lol...
[CITA = pickle8486; 1486406] ok, así que obtuve una serie i c360i que se congela periódicamente. Hasta ahora he hecho todos los pasos normales de inicialización y ejecuto la herramienta de reinicio de la serie 8. Actualmente está en el firmware 7b que se cargó al 100%. Estas máquinas parecen ser una buena idea, pero KM necesita volver al tablero de dibujo en el lado del software. [/ QUOTE]
Reescribe el fw (Version GG2-7B) , (Version 11_Movie Data)
Switch No.: 25
HEX Assignment: 10 -> Function Version 2.0
When you enable Market Place Application on the MFP operation panel, please be sure to check a connection with Market Place
Website by touching Market Place icon on Basic Style.
If you skip this step (verification of connection), Market Place application may not work.
Freezing and not booting up is usually due to the storage board. You can usually tell by attempting to update firmware and MFP controller only getting to 10% then displaying N.G. Storage board should sort this problem as well.
Bookmarks