Results 1 to 10 of 10
  1. #1
    Technician
    Join Date
    Jan 2019
    Location
    roma
    Posts
    20
    Rep Power
    3

    konica c224 scan ftp in nas

    good evening everyone I wanted to know what was the right syntax to set up an ftp in a nas in a konica minolta c224 series the folder has this address \ vol_1 \ scan


    host addres: ip address of the nas
    File path ?? (\ Vol_1 \ scan) ??

  2. #2
    IT Manager 2,500+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    USA
    Posts
    3,554
    Rep Power
    67

    Re: konica c224 scan ftp in nas

    Quote Originally Posted by lucycopy View Post
    good evening everyone I wanted to know what was the right syntax to set up an ftp in a nas in a konica minolta c224 series the folder has this address \ vol_1 \ scan


    host addres: ip address of the nas
    File path ?? (\ Vol_1 \ scan) ??
    The file path syntax requires a forward back-slash (/) and any additional sub-folders also require
    a forward slash (/) as a separator.

    • SMB: \\host name\folder
    • FTP: ftp://host name/folder name


    Most likley its scanning SMB to the NAS if it stop working
    Could be do to an update on the NAS as smb1.0 has been disabled on most system updates


    Scanning smb would be the other

  3. #3
    Technician
    Join Date
    Jan 2019
    Location
    roma
    Posts
    20
    Rep Power
    3

    Re: konica c224 scan ftp in nas

    Quote Originally Posted by bsm2 View Post
    The file path syntax requires a forward back-slash (/) and any additional sub-folders also require
    a forward slash (/) as a separator.

    • SMB: \\host name\folder
    • FTP: ftp://host name/folder name


    Most likley its scanning SMB to the NAS if it stop working
    Could be do to an update on the NAS as smb1.0 has been disabled on most system updates


    Scanning smb would be the other
    thanks

    in nas the scan was ftp not smb
    so in file path I write? // vol_1 / scan?

  4. #4
    Field Supervisor 500+ Posts Bix's Avatar
    Join Date
    Apr 2018
    Location
    Berlin
    Posts
    983
    Rep Power
    20

    Re: konica c224 scan ftp in nas

    Front slesh is not mandatory in Konica Minolta

  5. #5
    Technician
    Join Date
    Jun 2018
    Posts
    36
    Rep Power
    0

    Re: konica c224 scan ftp in nas

    in a konica c353 after the logical formatting of the hard disk I can no longer make it work
    what can it depend on?
    ftp on a normal pc works

  6. #6
    Service Manager 2,500+ Posts
    konica c224 scan ftp in nas

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,721
    Rep Power
    65

    Re: konica c224 scan ftp in nas

    make sure the HDD shows as "installed"
    turn off enhanced security if enabled because that blocks FTP use.

    [edit]
    Question
    How to enable the input of an underscore character in the FTP and SMB Host Name fields.

    Answer
    Special firmware versions are available to support the underscore character for FTP and SMB Host Names.

    • Monochrome

    bizhub 223/283/363/423: Use version GSB-D1 (replaces version GE8-B5 that was for FTP only) is available

    • Color

    bizhub C224/C284/C364: Use version GS8-65
    bizhub C454/C554: Use version GS8-65
    bizhub C654/C754: Use version GS8-65

    After installing the special firmware, software DIPSW 44 must be set to Hex 20 or 00100000 binary.
    To change the DIPSw setting in Service Mode:
    1. Touch [Software Switch Setting].
    2. Touch [Switch No.] and enter the intended switch number with the ten-key pad.
    Software Switch No.: 44
    3. Touch [Bit Assignment].
    4. Use [?] or [?] to select a bit. To set the bit, enter 0 or 1 with the ten-key pad.
    5. To set the bit in Hex, touch [HEX Assignment] and use the ten-key pad and [A] to [F]
    keys to enter numbers and characters.
    HEX Assignment: 00 g No Underscore support
    HEX Assignment: 20 g Enables the Underscore character for FTP and SMB Host Name fields
    6. Touch [Fix].
    Notes:
    a. The Special firmware and Release Notes are available via the Konica Minolta Download Selector and One-Stop Product Support.
    b. This firmware does not support the underscore character for PageScope Data Administrator or OpenAPI.
    c. When the Software Switch No.44 is set to 0x20, the underscore character can be input for SMB host name in the following settings:

    • Direct input of the destination for Scan to SMB and Scan to FTP
    • One-touch destination for Scan to SMB and Scan to FTP (It is also supported when using PSWC.)
    • Image Log Transfer (Type2) settings
    • PING Host Address field to help when troubleshooting

    d. The underscore character cannot be input in the beginning and ending of the host name. For example, the host names as follows are invalid.
    SMBhost_
    _SMBhost
    _SMBhost_
    [/edit]

  7. #7
    Service Manager 5,000+ Posts
    konica c224 scan ftp in nas

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,224
    Rep Power
    177

    Re: konica c224 scan ftp in nas

    Quote Originally Posted by enricocopyline View Post
    in a konica c353 after the logical formatting of the hard disk I can no longer make it work
    what can it depend on?
    ftp on a normal pc works
    completely out of context for this thread....

    go start your own new thread listing all steps taken... parts replaced ... parts counts.

    mind what thread you are posting in.

  8. #8
    Field Supervisor 500+ Posts
    Join Date
    Mar 2017
    Posts
    647
    Rep Power
    26

    Re: konica c224 scan ftp in nas

    And then he rips the guy int he new thread..lol

  9. #9
    Technician
    Join Date
    Jun 2018
    Posts
    36
    Rep Power
    0

    Re: konica c224 scan ftp in nas

    Quote Originally Posted by Synthohol View Post
    make sure the HDD shows as "installed"
    turn off enhanced security if enabled because that blocks FTP use.

    [edit]
    Question
    How to enable the input of an underscore character in the FTP and SMB Host Name fields.

    Answer
    Special firmware versions are available to support the underscore character for FTP and SMB Host Names.

    • Monochrome

    bizhub 223/283/363/423: Use version GSB-D1 (replaces version GE8-B5 that was for FTP only) is available

    • Color

    bizhub C224/C284/C364: Use version GS8-65
    bizhub C454/C554: Use version GS8-65
    bizhub C654/C754: Use version GS8-65

    After installing the special firmware, software DIPSW 44 must be set to Hex 20 or 00100000 binary.
    To change the DIPSw setting in Service Mode:
    1. Touch [Software Switch Setting].
    2. Touch [Switch No.] and enter the intended switch number with the ten-key pad.
    Software Switch No.: 44
    3. Touch [Bit Assignment].
    4. Use [?] or [?] to select a bit. To set the bit, enter 0 or 1 with the ten-key pad.
    5. To set the bit in Hex, touch [HEX Assignment] and use the ten-key pad and [A] to [F]
    keys to enter numbers and characters.
    HEX Assignment: 00 g No Underscore support
    HEX Assignment: 20 g Enables the Underscore character for FTP and SMB Host Name fields
    6. Touch [Fix].
    Notes:
    a. The Special firmware and Release Notes are available via the Konica Minolta Download Selector and One-Stop Product Support.
    b. This firmware does not support the underscore character for PageScope Data Administrator or OpenAPI.
    c. When the Software Switch No.44 is set to 0x20, the underscore character can be input for SMB host name in the following settings:

    • Direct input of the destination for Scan to SMB and Scan to FTP
    • One-touch destination for Scan to SMB and Scan to FTP (It is also supported when using PSWC.)
    • Image Log Transfer (Type2) settings
    • PING Host Address field to help when troubleshooting

    d. The underscore character cannot be input in the beginning and ending of the host name. For example, the host names as follows are invalid.
    SMBhost_
    _SMBhost
    _SMBhost_
    [/edit]


    can there be the problem of scans with - (minus) instead of with _ (undersore) in host name? In SMB? in konica c224

  10. #10
    Service Manager 2,500+ Posts
    konica c224 scan ftp in nas

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,721
    Rep Power
    65

    Re: konica c224 scan ftp in nas

    You can only try and see.
    If it fails try the host IP instead. That's the simple solution.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here