Thanks: 
Likes: In a konica minolta c353 after the logical formatting of the hard disk i can't scan ftp.
HD is installed
what does depend on?
Dislikes: 0
In a konica minolta c353 after the logical formatting of the hard disk i can't scan ftp.
HD is installed
what does depend on?
did you reload the system and others software on the HDD?Originally Posted by enricocopyline
what made you reformat the drive?
I formatted for an error
what do you mean by reloading the software?
you are over your head on this job. if you don't understand what " reloading system software is "
I have always formatted hard drives and have always worked quietly after formatting
you intend to reload the software with the flash card?
quiet I am able to do everything
What was the original error that made you do a HDD format..?
c-d004
run the diagnostics..
Go to [Service Mode] -> [Sate Confirmation] -> [HDD Adjust] -> [Memory Check]
If they get a NG, replace parts. (See below).
WORK0 = Replace Standard Memory (DIMM1).
WORK1 = Replace Expanded Memory (DIMM2).
FILE0 = 1 Memory of ASIC200 installed in the MFP board.
There isn't any system software to load after a format. Phil may be thinking of a different machine.
could there be some characters like (_) which are not supported in the 4series and the dpsw needs to be modified?
Reply With Quote
Bookmarks