Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: c253 1101 jam

  1. #1
    Technician
    Join Date
    Oct 2016
    Location
    MISSOURI
    Posts
    27
    Rep Power
    8

    c253 1101 jam

    Good afternoon
    I have a Bizhub c253 giving me a fit. Jams from tray 1 giving an 1101 code. I have replaced feed tires, addressed the one ways and shafts, cleaned paper feed clutch as well. I have also tried adjusting paper loop. I have used the service mode to check ps 23. The switch does change state every time. When the paper is jammed in the machine it does show the switch is actuated. The paper stops in the exact same spot every time. The paper is in the nip of the timing roller.
    Anyone have any ideas? Can the paper ports be switched between tray 1 and 2 for testing purposes?
    Thanks in advance Chuck

  2. #2
    Service Manager 1,000+ Posts
    c253 1101 jam


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,047
    Rep Power
    32

    Re: c253 1101 jam

    you say you "addressed" the one ways and shafts. does that mean you cleaned shaft and replaced the A02E561100 clutch.
    Also could be the CL1 clutch. CL2 is same part number so maybe try swapping them around

  3. #3
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,357
    Rep Power
    105

    Re: c253 1101 jam

    Clean or replace registration roller bushings especially if machine counter is high.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

  4. #4
    Service Manager 1,000+ Posts
    c253 1101 jam


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,047
    Rep Power
    32

    Re: c253 1101 jam

    i didnt do much work on the 353 series but did they have reg roller bushing problems too? i only had them on c364. it was real bad i had one roller i could hardly move by hand. they seemed to fixed it by e series

  5. #5
    Technician
    Join Date
    Oct 2016
    Location
    MISSOURI
    Posts
    27
    Rep Power
    8

    Re: c253 1101 jam

    Thanks for the advice. i will head back over and try the registration bushings and switch feed clutches. As far as addressing shafts i sanded with emery cloth and checked/oiled one way bearing. I wouldnt think it would could be a clutch because it feeds the paper every time but i will sure try. thanks again for the replies!

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Feb 2018
    Location
    Kankakee, Il
    Posts
    110
    Rep Power
    6

    Re: c253 1101 jam

    Yes, the registration bushings on this model lock up often. Also, The C454/554.

  7. #7
    Service Manager 2,500+ Posts
    c253 1101 jam

    Synthohol's Avatar
    Join Date
    Mar 2016
    Location
    north jersey
    Posts
    2,729
    Rep Power
    65

    Re: c253 1101 jam

    oiled the one way bearing?
    i alcohol the crap out of them to remove every drop of oil so they dont slip. for 21 years and only like 3 out of hundreds failed because the grooves were too worn to compress the shaft.
    IMHO thats counterproductive.

  8. #8
    Service Manager 5,000+ Posts
    c253 1101 jam

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    8,279
    Rep Power
    178

    Re: c253 1101 jam

    Quote Originally Posted by Synthohol View Post
    oiled the one way bearing?
    i alcohol the crap out of them to remove every drop of oil so they dont slip. for 21 years and only like 3 out of hundreds failed because the grooves were too worn to compress the shaft.
    IMHO thats counterproductive.
    +1 I NEVER OILED one way's

  9. #9
    Technician
    Join Date
    Oct 2016
    Location
    MISSOURI
    Posts
    27
    Rep Power
    8

    Re: c253 1101 jam

    No kidding? I was always taught to oil one ways. I was told that by our tech rep when i first started this career. (we are kyocera dealer) Ive been oiling them since 1996! Not saying im right though! I was unable to test things i switched between port 1 and 2 today. We are waiting on an image unit. If this doesnt work i will for sure remove oil from one ways and try again. Thanks for all the feedback.

  10. #10
    Service Manager 1,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    2,357
    Rep Power
    105

    Re: c253 1101 jam

    Same here. Always cleaned oneways good with piece of cotton soiled with isopropyl.
    Never lubed but they do factory come with some oil on them ...imho work good without it.
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here